Optikos offers linear positioning stages for scanning units and rotary stages for off-axis testing.
MS-100 One-Axis Source Scan Drive
The MS-100 provides horizontal scanning of a source unit. The X-axis (horizontal axis) adjustment is used to make properly sampled and phase invariant measurements of sampled imagers such as FLIRs and CCD cameras.
Specifications
Centered load capacity | 35 kg |
Range | ± 25 mm |
Repeatability (1σ) | ≤ 3 µm |
Resolution | ≤ 1 µm |
The MS-100 comes complete with hardware for mounting to an optical table.
MS-200 Two-Axis Source Scan Drive
This unit provides both horizontal and vertical scanning of the source unit. The X-axis (horizontal) and Y-axis (vertical) stages are used to make properly sampled and phase invariant measurements of sampled imagers such as FLIRs and CCD cameras. The MS-200 comes complete with hardware for mounting to an optical table.
Specifications
X-Stage (horizontal)
Centered load capacity | 25 kg |
Range | ± 25 mm |
Repeatability (1σ) | ≤ 3 µm |
Resolution | ≤ 1 µm |
Y-Stage (vertical)
Range | ± 4.5 mm |
Repeatability (1σ) | ≤ 2 µm |
Resolution | ≤ 1 µm |
MS-300 One-Axis Rotary Platform
This platform makes azimuthal angle adjustments of an imager under test. It allows for computer-controlled measurement of both on and off-axis imaging properties as well as field-of-view, distortion, and magnification. To mount a unit under test to the rotary platform, two interface plates are included with either 1 inch on-center 1/4-20 threads or 25 mm on-center M6 threads. The MS-300 comes complete with hardware for mounting to an optical table.
Specifications
Centered load capacity | 45 kg |
Diameter | 305 mm (12 inches) |
Range | ±120° |
Repeatability (1σ) | .005° |
Resolution | .001° |
MS-400 Two-Axis Rotary Platform
This platform makes azimuth and elevation angle adjustments of an imager under test. It allows for computer-controlled measurement of both on and off-axis imaging properties as well as field-of-view, distortion, and magnification. To mount a unit under test to the rotary platform, two interface plates are included with either 1 inch on-center 1/4-20 threads or 25 mm on-center M6 threads. The MS-400 comes complete with hardware for mounting to an optical table.
Specifications
Azimuth
Diameter | 305 mm (12 inches) |
Range | ±120° |
Repeatability (1σ) | .005° |
Resolution | .001° |
Elevation
Centered load capacity | 30 kg * |
Mounting platform | 130 mm x 160 mm |
Optical axis center of rotation from top of mounting platform |
146 mm |
Range | ± 45° |
Repeatability (1σ) | .005° |
Resolution | .001° |
*Please consult with an Optikos engineer for off-center load capacity.